General Sales | +44 (0) 1255 446838
Sales Support | +44 (0) 1255 423601 (Option 5)
Transport | +44 (0) 1255 462567
Rail | +44 (0) 1255 440291
Industral & Commercial | +44 (0) 1255 440290
High-Rise | +44 (0) 1255 446830
Decking & Cladding | +44 (0) 1255 440298
Marine | +44 (0) 1255 440297
Sales Support | info@duracomposites.com
We’re revolutionising industry with d² Dura Profile GRP structural beam sections: unleashing data-driven engineering, transformative strength, and sustainability.
Our d² composites benefit from superior manufacturing standards and intelligent design optimisation versus the competition, pushing the boundaries of what GRP pultruded profiles can achieve. They don’t just offer a modest improvement; it’s a revolution in performance. Here’s how…
From standardised coupon testing to examining fully pultruded profiles, we can demonstrate that on average, d² profiles exceed E23 Grade by an astounding 50%.
d² Dura Profile lets you use smaller or fewer components, enhancing efficiency while reducing health and safety risks, equipment needs, transport requirements, and overall costs.
Being up to 50% lighter than steel profiles that perform the same task equals a 50% reduction in carbon footprint, making our profiles a sustainable choice for eco-conscious projects.
Our material, design and manufacturing know-how results in profiles which are on average 50% stronger than the competition, allowing for designers and engineers to use smaller or fewer components in major projects when using d², enhancing efficiency and cost effectiveness. In a nutshell, you can opt for profiles that are either twice as strong or 1/3 smaller when compared to GRP competitors.
Consider the savings you could make from manoeuvring a 6-metre-long 152 Wide Flange Beam at 35kg into position with a two-person lift instead of using a crane to move a heavy steel section.
Through rigorous in-house testing and advanced data modelling, we delve deep into the properties of the microstructures as well as the fully pultruded profiles. These investigations allow us to truly understand how our profiles will perform across a wide spectrum of structural applications. The precise arrangement of the glass rovings, multi-axial fabrics and resin provides exceptional strength, structural integrity and surface protection.
(mm)
Length: 6000
Height: 50
Width: 50
Thickness: 6.35
Colour: Dark Grey
(mm)
Length: 6000
Height: 76
Width: 76
Thickness: 9.5
Colour: Dark Grey
(mm)
Length: 6000
Height: 102
Width: 102
Thickness: 12.7
Colour: Dark Grey
(mm)
Length: 6000
Height: 152
Width: 152
Thickness: 12.7
Colour: Dark Grey
(mm)
Length: 6000
Height: 50
Width: 50
Thickness: 6.4
Colour: Dark Grey & Yellow
(mm)
Length: 6000
Height: 64
Width: 64
Thickness: 6.4
Colour: Dark Grey & Yellow
(mm)
Length: 6000
Height: 76
Width: 76
Thickness: 6.4
Colour: Dark Grey
(mm)
Length: 6000
Height: 101
Width: 101
Thickness: 8
Colour: Dark Grey
(mm)
Length: 6000
Height: 100
Width: 60
Thickness: 5.5
Colour: Dark Grey
(mm)
Length: 6000
Height: 203
Width: 55
Thickness: 9.5
Colour: Dark Grey
(mm)
Length: 6000
Height: 254
Width: 72
Thickness: 12.7
Colour: Dark Grey
(mm)
Length: 6000
Height: 55
Width: 203
Thickness: 8
Depth: 60
Colour: Dark Grey
(mm)
Length: 6000
Diameter: 38
Wall Thickness: 3
Colour: Dark Grey & Yellow
(mm)
Length: 6000
Diameter: 50
Wall Thickness: 6
Colour: Dark Grey & Yellow
(mm)
Length: 6000
Diameter: 34
Wall Thickness: 10 +5
Colour: Yellow
(mm)
Length: 6000
Height: 152
Width: 152
Thickness: 9.5
Colour: Dark Grey
(mm)
Length: 6000
Height: 203
Width: 203
Thickness: 12.7
Colour: Dark Grey
(mm)
Length: 6000
Height: 305
Width: 305
Thickness: 12.7
Colour: Dark Grey
(mm)
Length: 6010
Height: 363
Width: 170
Thickness: Base 10, Upright 8
Colour: Dark Grey
(mm)
Length: 6010
Height: 363
Width: 170
Thickness: Base 10, Upright 12.7
Colour: Dark Grey
(mm)
Length: 3010
Height: 13
Width: 150
Thickness: 4
Colour: Dark Grey & Yellow
(mm)
Length: 6000
Height: 60
Width: 4.3
Wall Thickness: 4.5
Colour: Dark Grey & Yellow
(mm)
Length: 3000
Width: 1220
Thickness: 12
Colour: Dark Grey
Not only have we saved over 5 million kgs of CO2 through our d² product innovation so far, but we’ve also embarked on a project to recycle all our GRP. If you have GRP waste materials from your on-site installation, or if your Dura product is end of life – it will be repurposed into the production of new materials at our UK HQ. A real-world solution to a real-world problem, which means you can have total peace of mind that you’re choosing a great sustainable material option for your project.
Find out how our market-leading GRP profiles are reshaping the industry.
We have supplied durable GRP subflooring flooring as a more durable alternative to plywood to…
First Light Fusion has developed a unique projectile fusion approach inspired by the pistol shrimp's…
Dura Composites' in-house CAD team designed a bespoke M-shaped platform with multiple gantries for convenient…
Explore our solutions and services to help you build resilient, greener and safer infrastructure.
Performance Sheets
We don’t leave performance to chance. We engineer it into every d² profile: Our d²…
Download
Certificates
This is an Environmental Product Declaration in accordance with EN 15804+A2 & ISO 14025/ISO 21930…
Download
Installation Manuals
This Dura Profile Install Manual enables designers and contractors to gather the necessary material data,…
Download
Brochures
Cost-effective, practical and safe GRP platforms, walkways, access structures & bespoke fabrications constructed from our…
DownloadOur innovative recyclable products can help accelerate the construction of critical infrastructure. Talk to our experienced team about how you can tap into our specialist knowledge and engineering capability for your project.
With over 15 years in GRP, I deliver design, supply and install diverse projects from 240m rail depot gantries to water chamber covers. I find being on site the best way to exceed expectations and meet program!
Client Success Manager
Quality is at the heart of everything we do in the Fabrication Centre. One of my favourite ever projects was creating our in-house designed Shaft Dome for a rail customer.
Fabrication & CNC Resource Manager
I’m proud to be an expert in Computer Aided Manufacture. Spearheading Dura’s ability to precisely cut angles and holes so our assembly teams can fit together each part with ease is so rewarding.
CAM Programmer
